ANTI-SLIP
Nilego® ANTI-SLIP Waterproofing – NON-SLIP FINAL HYDROISOLATION
Nilego®ANTI-SLIP Waterproofing one-component final hydro insulation – excellent abrasion and adhesion, prevents slipping, water and ice resistant, excellent hydro insulation. It is used to protect slippery surfaces from unwanted slips, falls, injuries and as hydro insulation. The product is fast and easy to use. Ideal for: stairs, complete stairs, surfaces around swimming pools, underground and above ground parking lots, terraces, slippery indoor and outdoor surfaces, access ramps, parking lots, etc.
– Concretes should be at least 28 days old.
– The moisture content of the substrate must be less than 10%.
– It is applied on concrete, stone, mortar, tiles, terrazzo, marble, etc.
– It is applied directly on new or old concrete.
– The surface must first be thoroughly clean, dust-free, degreased and dry.
– It is applied at temperatures from 5 ° C to 30 ° C.
– Drying time: at room temperature 3-4 hours.
– Each subsequent layer is applied after 5-6 hours at temperatures of 25 °C
– Work tools: brush or roller, depending on the surface. After work, they are washed with water. – Dilution: Do not dilute with any type of diluent or water.
– Before use, stir with a mixer with low speed.
– Storage: at room temperature, away from sources of heat as well as solar energy.
– Consumption: 1,2-1,5 kg/m2 depending on the roughness of the surface
– Color: gray
– The product is environmentally friendly, non-toxic, does not contain flammable components. It is water based.
* PACKAGING:
Nilego® ANTI-SLIP Waterproofing: 1kg. 5kg. 10kg. and 20kg.
