Nilego® BETON KONTAKT – structural substrate for concrete surfaces. It is used as a bridge on flat concrete surfaces and as a base (primer). Features: Creates adhesion force, reduces the ability to absorb water on the surface, increases the ability of the plaster to adhere. Neutralizes the PH. For indoor and outdoor use.

* Suitable for application on: concrete, plaster, plasterboard, mortar, lime, etc.
* Operating instructions: Before use, mix it with an electric mixer with low speed.
* Concretes must be at least 28 days old. The moisture content of the substrate must be less than 10%.
* The surface must first be thoroughly cleaned, dust-free, degreased and dry.
* It is applied at a temperature of + 5 ° C to + 30 ° C in one layer. Apply with a roller, brush as needed.
* Drying time: at room temperature from 4-5 hours at a temperature of 20 ° C.
* After work, wash the utensils immediately with water.
* Dilution: the product is not diluted with any type of diluents. If necessary, dilute 10-15% with water.
* Occupational safety: At work it is recommended to use personal protective equipment, according to the legal regulations in the country where this product is used. No harmful effects on the skin and airways.
* Storage: In the original packaging. At a temperature from +5°C to + 35°C. Do not store exposed to sunlight and avoid heat sources. The product is not resistant to low temperatures (it freezes).
* Consumption: Depending on the roughness of the surface, from 200-250gr./m2.
* Shelf life: 1 year in original unopened packaging and well stored.

* PACKAGING: Nilego® BETON KONTAKT: 1kg. 5kg. 12kg. and 20kg.